7: English
Reactivity Data __________________
Stability:
Stable.
Materials to Avoid:
None.
Polymerization:
Will not occur.
Hazardous Decomposition or Byproducts:
None.
Incompatibility:
None.
Preventive Measures ______________
Personal Protective Equipment
Respiratory Protection:
None.
Protective Gloves:
Not normally required. Desirable in some
cases.
Eye Protection:
Not required in normal use. Keep ribbon
away from your eyes: one of the components of the ribbon ink
is an eye irritant. Wash hands with soap and water after
handling the ribbon. Keep out of reach of children.
Engineering Controls
Ventilation:
Not applicable.
Other Protective Equipment and/or Hygienic
Practices:
Not applicable.
Spill Cleanup
If ribbon is inadvertently released, it should be rewound. Wash
hands with soap and water after handling the ribbon.
Waste Disposal
Follow appropriate federal, state and local regulations.
Keep away from aquatic environments. Ink is toxic to aquatic
organisms and may cause long-term adverse effect in aquatic
environments.
Precautions
Precautions for Handling:
Keep ribbon away from your
eyes: one of the components of the ribbon ink is an eye
irritant. Wash hands with soap and water after handling the
ribbon. Keep out of reach of children.
Precautions for Storage:
Avoid direct sunlight. Store in a
cool, dark place.
Other Precautions:
None.
Shipping Information
Special Shipping Information:
None.
UN Number:
Not applicable.
Hazards Class
: None.
User’s Responsibility ______________
This bulletin cannot cover all possible situations which the user
may experience when using this product. Each aspect of your
operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines and
employee instructional programs for your operation.
Preparation Date of MSDS __________
Date:
November 15, 2006
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
www.okiprintingsolutions.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
