Operating instructions > 27
S
ELECTING
THE
PRINT
QUALITY
AND
FONT
ML3320ECO/ML3321ECO
Press PRINT QUALITY to select:
In order to use Super Speed Draft (SSD), you must enter the Menu Mode and make
changes:
1. Press SHIFT + SEL
2. Press GROUP twice.
3. Press ITEM.
4. Press SEL until DRAFT appears as the setting for the Print Mode.
5. Press ITEM.
6. Press SEL (SSD appears as the setting for the DRAFT Mode).
7. Press SHIFT + SEL key to exit the Menu Mode and save your changes.
NOTE
Front panel settings for print quality and character pitch can be overridden by
software commands. The lights will always reflect the printer's state.
HSD: High Speed Draft > Lower quantity, faster speed
> Gothic font only
> Recommended for preliminary
drafts
UTL: Utility > Medium quality, medium speed
> Gothic font only
> Recommended for internal
documents and high-volume data
NLQ: Near Letter Quality > Highest quality, slowest speed
> Courier or Gothic fonts
> Recommended for correspondence
SSD: Super Speed Draft > Lowest quality (12 cpi only),
fastest speed
> Gothic font only
> Recommended for fastest output of
preliminary drafts
PRINT QUALITY
HSD
NLQ
UTL
SSD
To Next Page
Loading...
Need help?
General
