Oki ML3390 User Manual

4 ML3390/91
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT
TOF
Micro Feed
Up
Micro Feed
Down
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10 12 15
17
20 PROP
Correcting Repetitive Rear-Feed Jams
If the paper keeps jamming, you probably have bits of paper
stuck in the paper path.
1. Perform steps 1 through 3 under “Rear-Feed Jams.”
2. Grasp the paper separator (➊), lift it slightly, pull back
on it, then swing it forward.
➊
3. Fold some continuous-form paper over three times to
make a page four sheets thick, load it on the tractors and
close the covers.
4. Swing the paper separator over, and use the platen knob
to draw the quadruple-thick page around the platen: this
brings out any jammed bits of paper.
QUIETPARKTEAR
AD
NU
SET
PRINT
TOF
ed
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10 12 15
17
20 PROP
3390hlp3.pm6 22/03/96, 16:054

Oki ML3390 Specifications

General

Color	No
Built-in barcodes	Code 39, UPC-A, UPC-E
Maximum resolution	360 x 360 DPI
Maximum printing width (columns)	160
Media thickness	165 x 91 mm
Print technology	Dot matrix
Dimensions (WxDxH)	398 x 345 x 116 mm
Power requirements	220/230 VAC, 240V AC
Connectivity technology	Wired
Recommended media weight	45 - 90 g/m²
Sound pressure level (printing)	57 dB
Mean time between failures (MTBF)	10000 h