Activating the Theft-Deterrent Feature
The instructions which follow explain how to enter your
secret code to activate the THEFTLOCK system. It is
recommended that you read through all nine steps
before starting the procedure.
NOTE:
If
you allow more than 15 seconds to elapse
between any steps, the radio automatically reverts to
time and you must start the procedure over at Step
4.
1. Write down any three or four-digit number from
000
to
1999
and keep it in a safe place separate from
the vehicle.
2.
Turn the ignition to ACCESSORY or RUN.
3.
Turn the radio off.
4.
Press the
1
and
4
buttons together. Hold them down
until
---
shows on the display. Next you will use the
secret code number which you have written down.
5.
Press MN and
000
will appear on the display.
6.
Press MN again to make the last two digits agree
with your code.
7.
Press HR to make the first one or two digits agree
with your code.
8.
Press AM-FM after you have confirmed that
the
code matches the secret code you have written down.
The display will show
REP
to let you know that you
need to repeat Steps 5 through
7
to confirm
your
secret code.
9.
Press AM-FM and this time the display will show
SEC
to let you know that your radio is secure.
Unlocking
the Theft-Deterrent Feature After
a
Power
Loss
Enter your secret code as follows; pause no more than
15 seconds between steps:
1.
LOC
appears when the ignition is on.
2.
Press MN and
000
will appear on the display.
3.
Press MN again to make the last
two
digits agree
4.
Press
HR
to make the first one or two digits agree
with your code.
with your code.
5.
Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show SEC, indicating the radio
is
now operable and secure.
3-22
To Next Page
Loading...
Need help?
General
