9.
Replace the wheel nuts
with the rounded end
of
the nuts toward the
wheel. Tighten each nut
by hand until the wheel
is held against the hub.
If
a nut cannot be
tightened by hand, use
the wrench, and see your
retailer right away.
10.
Lower the vehicle by rotating the wheel wrench to
the left on the jack. Lower the jack completely.
11.
Using the wheel
wrench, tighten the
wheel
nuts
firmly
in
a
crisscross
sequence
as
shown.
1
CAUTION:
Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel to become loose
and even come
off.
This could lead to an accident.
Be sure to use the correct wheel nuts.
If
you
have
to replace them, be sure to get new
GM
original
equipment wheel nuts.
Stop somewhere as soon as you can and have
the nuts tightened with a torque wrench to
100
lb-ft
(140
Nom).
I
5-30
To Next Page
Loading...
Need help?
General
