Cleaning
Glass
Surfaces
Glass should be cleaned often. GM Glass Cleaner (GM
Part
No.
1050427)
or a liquid household glass cleaner
will remove normal tobacco smoke and dust films on
interior glass.
Don’t use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals
on
the inside rear
window, since they may have to be scraped off later.
If abrasive cleaners are used on the inside
of
the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
Cleaning the Outside
of
the
Windshield and Wiper Blades
If
the windshield is not clear after using the windshield
washer, or if the wiper blade chatters when running,
wax, sap or other material may be on the blade
or windshield,
Clean the outside
of
the windshield with GM
Windshield Cleaner,
Bon
Ami@ Powder (non-scratching
glass cleaning powder), GM Part No.
105001
1.
The
windshield
is
clean if beads do not form when you rinse
it with water.
Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by wiping
vigorously with a cloth soaked in full-strength windshield
washer solvent. Then rinse the blade with water.
Check the wiper blades and clean them as necessary;
replace blades that look worn.
Weatherstrips
Silicone grease on weatherstrips will
make
them
last longer, seal better, and not stick or squeak. Apply
silicone grease with a clean cloth at least every
six months. During very cold, damp weather
more frequent application may be required. (See
“Recommended Fluids and Lubricants” in the Index.)
6-54
To Next Page
Loading...
Need help?
General
