BX51M
CONTENTS
4
5-6
7-16
IMPORTANT — Be sure to read this section for safe use of the equipment. —
1 NOMENCLATURE
2
3 USING THE CONTROLS
REFLECTED LIGHT BRIGHTFIELD/DARKFIELD OBSERVATION PROCEDURE
3-1 Base ........................................................................................................................................................................................................................... 7
3-2 Focusing Block ................................................................................................................................................................................... 8-9
1 Voltage Indication 2 Using the Light Intensity Preset Switch
3-3 Reflected Light Brightfield/Darkfield Illuminator (BX-RLA2)............................................ 9-11
3-4 Stage............................................................................................................................................................................................................ 12-14
3-5 Observation Tube ..................................................................................................................................................................... 15-16
4 OBSERVATION METHODS (Using BX-RLA2)
17- 19
1 Adjusting the Interpupillar Distance 2 Adjusting the Dioper
3 Using the Eye Shades 4 Using Eyepiece Micrometer Disks
5
Selecting the Light Path of the Tinocular Tube
6
Adjusting the Tilt (with the U-TBI3/SWETTR2)
1 Selecting the Light Path 2 Centering the Field Iris Diaphragm (FS)
3 Centering the Aperture Iris Diaphragm (AS) 4 Using the ND Filter Knob
5 Using the Filters
1 Placing the Specimen 2 Adjusting the X/Y-Axis Knob Tension
3 Using the Y-Axis Lock Lever 4 Rotating the Stage
5 Adjusting the Stage Height
1 Adjusting the Focus
2 Replacing the Fine Adjustment Knob
3 Adjusting the Coarse Adjustment Knob Tension 4 Pre-focusing Lever
1-3
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to
assemble the microscope yourself, please read chapter 8, “ASSEMBLY” (pages 27 to 29) carefully.
5 TROUBLESHOOTING GUIDE
6 SPECIFICATIONS
20-22
23
7 OPTICAL CHARACTERISTICS <<UIS2 (UIS) Series>>
8
24-26
27-29
PROPER SELECTION OF THE POWER SUPPLY CORD .......................................................................
30-31
ASSEMBLY
—
See this section for the replacement of the light bulb. —
4-1 Reflected Light Brightfield/Darkfield Observation.............................................................................. 17
4-2
Reflected Light Nomarski DIC (Differential Interference Contrast) Observation
.............. 17- 19
4-3 Reflected Light Simplified Polarized Light Observation ............................................................ 19
To Next Page
Loading...
Need help?
General
