To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why is extinction not obtainable on my Olympus BX53-P Microscope?
If you cannot achieve extinction with your Olympus Microscope, make sure the analyzer is correctly engaged in the light path. This should resolve the issue.
What to do if the conoscopic image is not visible on Olympus Microscope?
If the conoscopic image is not visible through your Olympus Microscope, here are a few things to check: 1. Ensure the condenser top lens is properly swung into the light path. 2. Verify the Bertrand lens is correctly placed in the light path. 3. If an intermediate attachment for orthoscopic observation (U-OPA) is attached, replace it with the U-CPA if available. Otherwise, look into the eyepiece sleeve to observe the conoscopic image.
How to fix a dark field of view on an Olympus BX53-P?
If the bulb is lit but the field of view remains dark on your Olympus Microscope, it could be due to a couple of reasons. First, check if the Bertrand lens is engaged and, if so, remove it from the light path. Second, ensure that the microscope is not in the extinction condition by removing the analyzer from the light path.
General| Focusing | Coaxial coarse and fine focusing knobs |
|---|---|
| Optical System | UIS2 optical system |
| Illumination | LED or Halogen |
| Observation Method | Brightfield, Darkfield, Phase Contrast, Fluorescence |
| Stage | Mechanical stage with XY movement |
| Camera Compatibility | Compatible with Olympus digital cameras |
| Nosepiece | Revolving nosepiece |
| Condenser | Abbe condenser |
| Power Supply | AC 100-240V |
Diagram illustrating the order and components for microscope assembly.
Step-by-step guide for assembling microscope components like stage, condenser, and nosepiece.
Instructions for specimen placement on the stage.
Procedure for rotating the stage horizontally and using click-stop features.
How to adjust the stage height for accommodating taller specimens.
Guide to using the Bertrand lens and analyzer for polarized light observation.
Essential optical axis adjustments, including polarizer and analyzer setup for extinction.
Procedure for performing orthoscopic observation using polarized light.
Steps for achieving conoscopic observation and focusing the conoscopic image.
Diagnosing and resolving common issues related to the microscope's optical system.
