25
Menu operations
2
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV’s
video signal type.
• The video signal types for different countries and districts are written below.
Check the video signal type before connecting the camera to the TV.
NTSC
:
North America, Taiwan, Korea, Japan
PAL
:
European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
9 VIDEO OUT Playing back pictures on a TV
NTSC / PAL
Connect to the TV’s
video input (yellow)
and audio input (white)
AV cable (provided)
Multi-connector
Connector cover
Settings on the TV
Turn the TV on, and set TV’s setting
to video input mode.
• For details of switching to video
input, refer to your TV’s instruction
manual.
Settings on the camera
Set the mode switch to q, and press
the POWER button to turn the
camera on.
• The last picture taken is displayed
on the TV. Use the arrow pad to
select the picture you want to
display.
To Next Page
Loading...
Need help?
General
