21
EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
1
Press the Y button.
OFF
P
OKOK
N
ORM
SET
SELFTIMER
OFF
ON
Y
12M
2
Use kl to select the desired
setting option, and press the B
button to set.
Option Description
OFF The self-timer is deactivated.
ON
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Increasing the brightness of
the monitor ( Backlight boost)
Press in shooting mode. The monitor
becomes brighter. If there is no operation for 10
seconds, the previous brightness resumes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
