Olympus FL-300R User Manual

EN 7
Names of parts (Fig.
Names of parts (Fig.
p. 3)
p. 3)
1 Light-emitting area
2 Lock release
button
3 Lock pin
4 TEST button/
CHARGE lamp
5 AUTO CHECK
lamp
6 ON/OFF button
7 W knob
8 RC switch
9 Remote sensor
Continuous fi ring
Continuous fi ring
The fl ash may become hot when fi red many
times in succession, resulting in damage
or malfunction. The fl ash should be fi red
no more than 10 times in succession at
intervals of 6 seconds, after which it should
be left unused for at least 10 minutes.
Preparing a battery
Preparing a battery
(sold separately)
(sold separately)
Choose from the below batteries:
AAA (R03) alkaline batteries (x 2)
AAA (R03) NiMH batteries (x 2)
•
•
x
Notes
AAA (R03) manganese batteries cannot be used.
Loading batteries
Loading batteries
1
Open the battery compartment cover.
2
Insert the batteries with correct
+/– polarity.
3
Close the battery compartment cover.
Battery compartment
cover
Battery compartment
cover
Thank you for purchasing this Olympus product. To ensure your safety, please read this
instruction manual before use, and keep it handy for future reference.
bookR2190Unified.indb7bookR2190Unified.indb7 2011/03/2111:24:582011/03/2111:24:58

Olympus FL-300R Specifications

General

Type	Compact flash
Product color	Silver
Channels quantity	1 channels
Flash guide number	28 m
Wireless connection	Yes
Camera brands compatibility	Olympus
Guide number (ISO 100, set at 35mm zoom)	20 m
Battery type	AAA

Weight and Dimensions

Weight	97 g
Dimensions (WxDxH)	56.4 x 89.2 x 26.9 mm