Olympus SP-720UZ User Manual

32
EN
2 Use HI to select [] or [], and face the camera
toward white paper.
● Set the paper to fi ll the entire screen, and make
sure that there is no shadow area.
● Perform this procedure under the light where the
pictures are actually taken.
3 Press the  button.
● The camera releases the shutter and the white
balance is registered.
● The registered white balance is stored in the
camera. The data will not be cleared by turning off
the power.
● When the [] or [] whose white balance has
already been registered is selected in Step 2, new
white balance will be registered.
When the white area is not large enough or when the
color is too bright, too dark, or loud, the white balance
cannot be registered. Return to Step 2. Or, set the
other white balance.
Selecting the ISO sensitivity
1
Select the ISO setting option in the function
menu.
1/400 F3.2F3.2
0.00.0
MENUMENU
14 M
ISO Auto
1/400
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
3200
ISOISO
100100
ISOISO
HIGH
ISOISO
HIGH
3200
2
Use HI to select the setting option, and
press the A button to set.
Option Description
ISO Auto
The camera automatically adjusts
the sensitivity according to the
shooting scene.
High ISO Auto
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
blur caused by a moving subject or
by camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
1
Select the drive option in the function menu.
0.00.0
MENUMENU
14 M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
22
Single
2
Use HI to select the setting option, and
press the A button to set.

Olympus SP-720UZ Specifications

General

Megapixel	14 MP
Camera type	Bridge camera
Sensor type	CMOS
Image stabilizer	Yes
Total megapixels	14.4 MP
Image sensor size	1/2.3 \
Supported aspect ratios	16:9
Maximum image resolution	4288 x 3216 pixels
Still image resolution(s)	640 x 480, 1280 x 960, 1600 x 1200, 1920 x 1080, 2048 x 1536, 2560 x 1920, 3264 x 2448, 4288 x 2416, 4288 x 3216
Digital zoom	4 x
Optical zoom	26 x
Combined zoom	104 x
Focal length range	4.7 - 121.2 mm
Maximum aperture number	5.6
Minimum aperture number	3.2
Lens structure (elements/groups)	13/10
Maximum focal length (35mm film equiv)	676 mm
Minimum focal length (35mm film equiv)	26 mm
Focus	TTL
Focus adjustment	Auto
Normal focusing range	0.3 - ∞ m
Auto focusing (AF) modes	Spot Auto Focus
Super Macro focusing range	0.05 m
Macro focusing range (wide)	2.2 - ∞ m
ISO sensitivity	100, 200, 400, 800, 1600, 3200
ISO sensitivity (max)	3200
ISO sensitivity (min)	100
Light exposure correction	± 2EV (1/3EV step)
Fastest camera shutter speed	1/1400 s
Slowest camera shutter speed	4 s
Flash modes	Auto, Fill-in, Flash off, Red-eye reduction
Flash range (tele)	1.6 - 2.5 m
Flash range (wide)	0.3 - 2.1 m
Power source type	Battery
Camera shutter speed	1/2 - 1/1300 s
Scene modes	Beach, Candlelight, Cuisine, Documents, Fireworks, Night, Night portrait, Party (indoor), Portrait, Self-portrait, Snow, Sports, Sunset, Landscape (scenery)
Image editing	Resizing, Trimming
Photo effects	-
White balance	Auto, Fluorescent, Sunny, Tungsten
Camera playback	Single image, Slide show
GPS (satellite)	No
Self-timer delay	2, 12 s
Camera file system	Exif 2.3
Video resolutions	1280 x 720, 1920 x 1080 pixels
Video formats supported	QuickTime
Maximum video resolution	1920 x 1080 pixels
Audio formats supported	PCM
Internal memory	59 MB
Compatible memory cards	SD, SDHC, SDXC
Display diagonal	3 \
Display resolution (numeric)	460000 pixels
USB version	2.0
Product color	Silver
Battery type	LI-50B

Weight and Dimensions

Depth	73.2 mm
Width	107.4 mm
Height	72.6 mm
Weight (including battery)	405 g