20
USING THE MEMORY FUNCTION
The monitor automatically stores up to 100 readings.
It can also calculate an average reading based on the last 3 readings taken within
10 minutes.
TO VIEW THE READINGS STORED IN MEMORY
1. Press the button.
The Memory number appears for a second
before the pulse rate is displayed. The
most recent reading set is numbered “1”.
NOTES: • If the positioning indicator is set to
“on” before the measurement, the
positioning indicator is displayed
with the readings.
• When viewing the readings taken without setting
the date and time, “-:--” is displayed instead of the
date and time.
• If there are no readings stored in the memory, the
screen to the right is displayed.
2. Press the button repeatedly to view the readings stored in the memory.
Alternating
date/time
display
To Next Page
Loading...
Need help?
General
