31
5. Using Memory Function
Your monitor automatically stores up to 60 readings.
•This monitor can be used by multiple users. When you use memory
function with other users, track (or manage) your own readings
appropriately.
5.1 Viewing the Readings Stored in Memory
1. Press the button.
The Memory number appears for 1.5 seconds before the pulse rate is
displayed. The most recent reading stored in the memory will be
numbered as “1”.
•If the reading is high (refer to sub-section 1.3), the
“ ” symbol appears.
•If there are no readings stored in the memory, the
screen to the right is displayed.
•If the memory is full, new readings will replace the
old readings, starting with the oldest reading.
Alternating
date/time
display
To Next Page
Loading...
Need help?
General
