Omron BP785N User Manual

14
3. Using the Device
3.3 Taking a Measurement
Notes:
• To stop the measurement, press the START/STOP button once to deflate the arm cuff.
• Remain still and quiet while taking a measurement.
The monitor is designed to take measurements and store the measurement values in
the memory for 2 people using USER ID 1 and USER ID 2.
Using the Single Mode
1. Select your USER ID (1 or 2).
2. Press the START/STOP button.
The arm cuff starts to inflate automatically.
If your systolic pressure is
more than 210 mmHg
After the arm cuff starts to inflate, press and
hold the START/STOP button until the
monitor inflates 30 to 40 mmHg higher than
your expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
Inflating to a higher pressure than
necessary may result in bruising where
the arm cuff is applied.
START INFLATE DEFLATE COMPLETE
HEM-7321-Z_C_M.book Page 14 Monday, June 16, 2014 12:09 PM

Omron BP785N Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	Grey, White
Memory function	Yes
Number of users	2 user(s)
Memory registers	200
Placement supported	Upper arm
Mean arterial pressure	No
Display type	Analog
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)