Omron BP786 User Manual

7
EN
2. Preparation
2.1 Battery Installation
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Replace the battery cover.
Notes:
• When the low battery symbol ( ) appears on the display, turn the monitor off, then replace all batteries
at the same time. Long life alkaline batteries are recommended.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• Dispose of the device, components and optional accessories according to applicable local regulations.
Unlawful disposal may cause environmental pollution.

Omron BP786 Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	Grey, White
Auto power off	Yes
Number of users	2 user(s)
Memory registers	200
Placement supported	Upper arm
Mean arterial pressure	No
Display type	Analog
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)