Omron C200HX-CPU64 User Manual

!
!
!
!
!
!
5Safety Precautions
xii
1 Intended Audience
This manual is intended for the following personnel, who must also have knowl-
edge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
2 General Precautions
The user must operate the product according to the performance specifications
described in the operation manuals.
Before using the product under conditions which are not described in the manual
or applying the product to nuclear control systems, railroad systems, aviation
systems, vehicles, combustion systems, medical equipment, amusement
machines, safety equipment, and other systems, machines, and equipment that
may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide the
systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating OMRON PCs.
Be sure to read this manual before attempting to use the software and keep this
manual close at hand for reference during operation.
WARNING It is extremely important that a PC and all PC Units be used for the specified
purpose and under the specified conditions, especially in applications that can
directly or indirectly affect human life. You must consult with your OMRON
representative before applying a PC System to the abovementioned
applications.
3 Safety Precautions
WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so
may result in electric shock.
WARNING Do not touch any of the terminals or terminal blocks while the power is being
supplied. Doing so may result in electric shock.
WARNING Do not attempt to disassemble, repair, or modify any Units. Any attempt to do so
may result in malfunction, fire, or electric shock.
WARNING Do not touch the Power Supply Unit while power is being supplied or
immediately after power has been turned OFF. Doing so may result in electric
shock.
WARNING Provide safety measures in external circuits (i.e., not in the Programmable
Controller), including the following items, to ensure safety in the system if an
abnormality occurs due to malfunction of the PC or another external factor
affecting the PC operation. Not doing so may result in serious accidents.

Omron C200HX-CPU64 Specifications

General

Brand	Omron
Model	C200HX-CPU64
Category	Controller
Language	English

Summary

About this Manual

Section 2 System Configuration and Units

Describes the system configuration for C200HX/HG/HE PCs and their individual Units.

Section 3 Installation and Wiring

Details the procedures for installing a PC System, including mounting Units and wiring.

Section 4 Programming Console Operation

Explains the function of the Programming Console and its connection methods.

Section 5 Troubleshooting, Inspections, and Maintenance

Covers hardware/software errors, inspections, and maintenance for PC operation.

Appendix B Specifications

Provides detailed specifications for various PC Units, including I/O, CPU, and interface modules.

Appendix C Unit Current and Power Consumption

PRECAUTIONS

Safety Precautions

Details critical safety measures to prevent electric shock, fire, or damage.

Operating Environment Precautions

Specifies conditions to avoid for reliable PC system operation.

Application Precautions

Provides guidance on safe practices during installation and operation.

SECTION 2 System Configuration and Units

Basic Configuration

Details the fundamental setup of a PC system with CPU and Expansion I/O Racks.

Units

Describes various types of Units like CPU, Memory Cassettes, and I/O Units.

Expanded System Configurations

Covers advanced system setups including link systems and networks.

SECTION 3 Installation and Wiring

Installation Environment

Specifies necessary environmental conditions for PC installation.

Wiring

Provides detailed instructions for wiring power supply, I/O units, and handling electrical noise.

SECTION 4 Programming Console Operation

Using the Programming Console

Explains the nomenclature and basic operations of the Programming Console.

SECTION 5 Troubleshooting, Inspections, and Maintenance

Troubleshooting

Lists common errors for CPU/Expansion Racks, Input, and Output Units with probable causes.

Inspection and Maintenance

Details procedures for replacing fuses, relays, and batteries.

Appendix A Standard Models

CPU Rack

Expansion I/O Racks

I/O Units

Categorizes and lists standard I/O Units: Input, Output, Triac, Transistor, and Analog Timer.

Group-2 I/O Units

Special I/O Units

Appendix B Specifications

General Specifications

CPU Unit Specifications

Details specifications for CPU Units, covering control methods, memory, and functions.

RS-232C Port Specifications

Outlines RS-232C port specifications, pin assignments, and applicable connectors.

C200H Standard I/O Units

Lists specifications for standard I/O Units: Input, Output, Triac, Transistor, Interrupt, B7A, and Analog Timer.

Transistor Output Unit C200H-OD411

Specifies switching capacity, circuit configuration, and terminal connections for OD411.

Transistor Output Unit C200H-OD211

Details specifications for C200H-OD211 transistor output unit.

Transistor Output Unit C200H-OD212

Provides specifications for the C200H-OD212 transistor output unit.

Transistor Output Unit C200H-OD213

Details specifications for the C200H-OD213 transistor output unit.

Transistor Output Unit C200H-OD214

Specifies C200H-OD214 transistor output unit with load short-circuit protection.

Transistor Output Unit C200H-OD216

Details specifications for the C200H-OD216 transistor output unit.

Transistor Output Unit C200H-OD217

Provides specifications for the C200H-OD217 transistor output unit.

Transistor Output Unit C200H-OD21A

Specifies C200H-OD21A transistor output unit with load circuit protection.

Triac Output Unit C200H-OA122-E

Details specifications for the C200H-OA122-E triac output unit.

Triac Output Unit C200H-OA221

Provides specifications for the C200H-OA221 triac output unit.

Triac Output Unit C200H-OA222V

Triac Output Unit C200H-OA223

Triac Output Unit C200H-OA224

DC Input Unit C200H-ID111 (64 Points)

DC Input Unit C200H-ID216 (32 Points)

DC Input Unit C200H-ID217 (64 Points)

DC Input Unit C200H-ID218

DC Input Unit C200H-ID219

Transistor Output Unit C200H-OD218 (32 Points)

Transistor Output Unit C200H-OD219 (64 Points)

TTL Input Unit C200H-ID501 (32 Points)

12 VDC Input/Transistor Output Unit C200H-MD115

24 VDC Input/Transistor Output Unit C200H-MD215

High-density I/O Unit Limitations

TTL I/O Unit C200H-MD501

C200HS-INT01 Interrupt Input Unit

Group-2 B7A Interface Units (C200H-B7A)

Transmission Error Precautions

Appendix C Unit Current and Power Consumption

Maximum Current and Power Supplied

Calculating Current and Power Consumption

Unit Current and Power Consumption

Current Drawn by Standard I/O Units

Current Drawn by Group-2 High-density I/O Units

Current Drawn by Special I/O Units