Omron CX3 User Manual

Inhaling with the OMRON CX3 Nebuliser
Before using the nebuliser, the nebuliser kit must be cleaned according to the cleaning and
disinfection instruction within this manual.
1. Make sure that the filter compartment (air inlet) is not covered, otherwise the unit may become
overheated.
2. Make sure that the power switch is set to the OFF (O) position
and plug in the mains cable.
For steps 3 ~ 7, refer to the drawing below.
3. Remove the nebuliser cap from the medication tank by turning it counterclockwise and lifting it.
Remove the mouthpiece.
4. Remove the vaporiser head.
5. Fill the medication tank with the prescribed amount and type of medication (max 6 ml).
6. Reinsert the vaporisation head.
7. Reconnect the nebuliser cap to the medication tank and fit the mouthpiece.
English
5
1
2
3
4
5
6
2
1
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
Step 3 Step 7
Step 4 Step 5 Step 6

Omron CX3 Specifications

General

Brand	Omron
Model	CX3
Category	Medical Equipment
Language	English