Omron E3C-LD11 User Manual

CSM_E3JM_DS_E_12_3
1
Built-in Power Supply Photoelectric Sensor
E3JM
Model Contribute to Overall Cost
Reduction
• Easy to wire and adjust.
Ordering Information
Sensors (Refer to Dimensions on page 8.)
*Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.
Note: Tightening nuts, washers, and rubber bushings are not provided with UL-listed models.
Accessories (Order Separately)
Slit (A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.) (Refer to Dimensions on page 8.)
Reflectors (A Reflector is required for each Retro-reflective Sensor.)
The E39-R1 Reflector is provided with the Sensor. Order other Reflectors separately if required.
(Refer to Dimensions on E39-L/E39-S/E39-R .)
Note: Refer to Reflectors on E39-L/E39-S/E39-R on your OMRON website for details.
Mounting Bracket
Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. (Refer to E39-L/E39-S/E39-R )
E3JM Terminal Block Models
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read Safety Precautions on
page 6.
Sensing
method
Appearance
Connection
method
Sensing distance
Operation
mode
Output
configuration
Functions
Model
Conduit socket
thread size:
PF1/2
Conduit socket
thread size:
PG13.5
Conduit socket
thread size:
1/2-14NPT
UL-listed models
Through-
beam
(Emitter +
Receiver) *
Terminal
block
Light-ON
Dark-ON
(switch
selectable)
Relay
---
E3JM-10M4-NN E3JM-10M4-G-NN E3JM-10M4-NN-US
E3JM-10M4T-NN E3JM-10M4T-G-NN E3JM-10M4T-NN-US
DC SSR
---
E3JM-10S4-NN E3JM-10S4-G-NN E3JM-10S4-NN-US
E3JM-10S4T-NN E3JM-10S4T-G-NN E3JM-10S4T-NN-US
Retro-
reflective
with MSR
function
E39-R1 (provided)
Relay
---
E3JM-R4M4 E3JM-R4M4-G E3JM-R4M4-US
E3JM-R4M4T E3JM-R4M4T-G E3JM-R4M4T-US
DC SSR
---
E3JM-R4S4 E3JM-R4S4-G E3JM-R4S4-US
E3JM-R4S4T E3JM-R4S4T-G E3JM-R4S4T-US
Diffuse-
reflective
Relay
---
E3JM-DS70M4 E3JM-DS70M4-G E3JM-DS70M4-US
E3JM-DS70M4T E3JM-DS70M4T-G E3JM-DS70M4T-US
DC SSR
---
E3JM-DS70S4 E3JM-DS70S4-G E3JM-DS70S4-US
E3JM-DS70S4T E3JM-DS70S4T-G E3JM-DS70S4T-US
Slit width Sensing distance
Minimum detectable
object
(reference value)
Model Quantity Remarks
1 mm × 20 mm E3JM-10@4(T)-NN 1.2 m 1-mm dia. E39-S39
1 Slit each for the
Emitter and Re-
ceiver (2 Slits total)
(Seal-type long slit)
Can be used with the
E3JM-10@4(T)-NN,
E3JM-10@4(T)-G-NN and
E3JM-10@4(T)-NN-US Models.
Name Sensing distance Model Quantity Remarks
Reflectors E3JM-R4@4(T) 4 m E39-R1 1
Provided with the E3JM-R4@4(T),
E3JM-R4@4(T)-G and E3JM-R4@4(T)-US
Models.
Red light Infrared light
10 m
Timer
Timer
4 m
Timer
Timer
700 mm
Timer
Timer
Для заказов: +7(499)707-11-20,
Email: i@sp-t.ru
8-800-511-65-88(Бесплатно по РФ)

Omron E3C-LD11 Specifications

General

Brand	Omron
Model	E3C-LD11
Category	Accessories
Language	English