Motor Timer H2C 1
Motor Timer
H2C
Please read and understand this catalog before purchasing the
products. Please consult your OMRON representative if you have any
questions or comments. Refer to Warranty and Application
Considerations (page 12), and Safety Precautions (page 10).
DIN-sized (48 x 48, 45 x 75 mm) Motor Timer
with Variable Time Ranges
• Five time ranges are selectable per timer unit.
• Easy-to-monitor neon lamp for timing operation indication (for
110, 120, 220, 240 VAC types only).
• Easy-to-set large transparent knob and easy-to-read single pat-
tern scale facilitate time setting.
• Equipped with timing operation indicator and moving pointer.
• Conforms to EN61812-1 and IEC60664-1 4 kV/1 for Low Volt-
age, and EMC Directives (except for H2C-F@).
Model Number Structure
■ Model Number Legend
1. External Connection/Attachment
None: 11-pin socket
S: 11-pin socket/time setting ring
8: 8-pin socket
F: Front screw
2. Operation/Resetting System
None: Time-limit operation/self-resetting
R: Time-limit operation/electric resetting
Ordering Information
■ List of Models
12
H2C-@ @
Operation/resetting
system
Internal
connection
Terminal Time-limit
contact
Instantaneous
contact
Attachment Model
Time-limit operation/
self-resetting
Parallel motor and
clutch connection
8-pin socket SPDT SPDT --- H2C-8
Separate motor
and clutch connec-
tion
11-pin socket H2C
Y92A-Y1 Time Set-
ting Ring
H2C-S
Front screw --- H2C-F
Time-limit operation/
electric resetting
8-pin socket SPDT --- --- H2C-8R
11-pin socket SPDT H2C-R
Y92A-Y1 Time Set-
ting Ring
H2C-SR
Front screw --- H2C-FR
Note: Specify both the supply voltage and time range code (A, B, or C) in addition to the model number when ordering.
Example: H2C-S 24 VAC B
Time range code
Su
To Next Page
Need help?
General
