H3CR-A
H3CR-A
4
Solid-state Timer H3CR-A
DIN 48 x 48-mm State-of-the-art Multifunctional Timer
A wider power supply range reduces the number of
timer models kept in stock.
A wide range of applications through six or four
operating modes.
Reduced power consumption.
(Except for H3CR-A8E)
Enables easy sequence checks through instanta-
neous outputs for a zero set value at any time
range.
Length, when panel-mounted with a Socket, of 80
mm or less.
Time Setting Rings enable consistent settings and
limit the setting range.
Panel Covers enable various panel designs.
PNP input models available.
Rich variety of inputs: Start, reset, and gate
functions (11-pin models and -AP models )
RC
Ordering Information
11-pin Models
Output Supply voltage Input type Time range Operating mode
(see note 2)
Model
Contact
100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
No-voltage input 0.05 s to 300 h Six multi-modes: A,
B, B2, C, D, E
H3CR-A
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
Dual-modes: G, J H3CR-A-300
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
100 to 240 VAC (50/60 Hz)/
100 to 125 VDC
Voltage input Six multi-modes: A,
B, B2, C, D, E
H3CR-AP
24 to 48 VAC (50/60 Hz)/
12 to 48 VDC
To Next Page
Loading...
Need help?
General
