27
4.Handling Errors and Problems
4. Handling Errors and Problems
4.1
Error Messages
Error Display Cause Remedy
Movement during
measurement
Repeat measurement. Remain
still and do not talk during
measurement.
Refer to section 3.3.
Air plug
disconnected.
Insert the air plug securely.
Refer to section 3.2.
Arm cuff is not
applied correctly.
Apply the arm cuff correctly.
Refer to section 3.2.
Clothing is interfering
with the arm cuff.
Remove any clothing interfering
with the arm cuff.
Refer to section 3.2.
Air is leaking from the
arm cuff.
Replace cuff with new one.
Refer to Chapter 6.
The arm cuff was
inflated above 299
mmHg when inflating
the cuff manually.
Remove the arm cuff and take
another measurement.
Refer to section 3.3.
Care and maintenance
HEM-7300-C3_B_M.fm Page 27 Tuesday, March 9, 2010 10:17 AM
To Next Page
Loading...
Need help?
General
