6
• During measurement, make sure that no mobile phone or any other electrical
devices that emit electromagnetic fields are within 12 inches (30 cm) of this
device. This may result in incorrect operation of the device and/or cause an
inaccurate reading.
• Do not disassemble or attempt to repair the device or components. This may
cause an inaccurate reading.
• Do not use in a location with moisture, or a location where water may splash on
the device. This may damage the device.
• Do not use the device in a moving vehicle. For example, the car or airplane.
• Read “What to do if your systolic pressure is more than 210 mmHg” of this
instruction manual, if your systolic pressure is known to be more than 210 mmHg.
Inflating to a higher pressure than necessary may result in bruising of the arm
where the cuff is applied.
Data Transmission
• Do not replace the battery or unplug the AC adapter when in use for wireless
communications. This may result in incorrect operation of the device or damage to
the data.
• Do not place integrated circuit cards, magnets, metal objects, or other devices that
emit electromagnetic fields near the device when in use for wireless
communications. This may result in incorrect operation of the device or damage to
the data.
AC Adapter (optional accessory)
• Fully insert the power plug into the outlet.
• When disconnecting the power plug from the outlet, be sure to safely pull from the
power plug. Do not pull from the power cord.
• When handling the power cord, take care not to do the following:
• Wipe any dust off of the power plug.
• Unplug the monitor when not in use.
• Disconnect the power plug before cleaning.
Do not damage. Do not break it.
Do not tamper with it. Do not forcibly bend or pull.
Do not twist. Do not bundle during use.
Do not pinch. Do not place under heavy objects.
To Next Page
Loading...
Need help?
General
