1312
USING THE SYSTEM RESET FUNCTION
USING THE MEMORY FUNCTION
This unit can store and display up to seven days of previous data.
The current day’s data is automatically stored in memory when the
time reaches 12:00AM. The display will return to 0.
NOTE:
The time must be correctly set in the unit.
How to view data stored in the memory
Press the MEMO Button.
The previous day’s data is displayed. Continue to press the MEMO
Button to display all seven days of data.
NOTE:
If no button is pressed for more than 1 minute, the display will
return to the current day’s data.
Press and hold the MEMO Button to return to the current day’s
data.
12
Use the SYSTEM RESET function in the following cases:
• When the display becomes unrecognizable
• When you want to delete all data
Press the SYSTEM RESET Button on the
back of the unit.
All the data in memory is deleted and settings
return to default values.
To reset the time refer to “Setting the Time” on
page 7.
To Next Page
Loading...
Need help?
General
