Omron HJ-329 User Manual

8
The unit comes with the battery installed. When you use the unit for the first time, follow the
steps below. For setting range details refer to “SPECIFICATIONS”.
NOTE:
If the initial settings are not correct, the measurement results may not be accurate.
1. Press and hold any button for 2 seconds.
After “HELLO” has been displayed, “lb” and “kg” flash on the display.
2. Setting the weight units.
A) Press or to select the mode.
B) Press to confirm the setting.
3. To set the height/stride length unit, repeat steps A) and B)
in step 2 above.
4. To set the distance unit, repeat steps A) and B) in step
2 above.
5. Setting the weight.
A) Press or to select the desired value for a setting.
• Press ( ) to advance (go back) one.
• Hold ( ) down to advance (go back) rapidly.
B) Press to confirm the setting.
6. To set the height, repeat steps A) and B) in step 5 above.
7. To set the stride length, repeat steps A) and B) in step 5 above.
8. To set the hour, repeat steps A) and B) in step 5 above.
9. To set the minute, repeat steps A) and B) in step 5 above.
All the settings are completed.
Adjust the settings
1. Press and hold and at the same time.
“lb” or “kg” flash on the display.
2. Follow the procedure from step 2 of “SETTINGS”.
SETTINGS
A)
B)

Omron HJ-329 Specifications

General

Brand	Omron
Model	HJ-329
Category	Pedometer
Language	English