12
3 Rotatetheinhalationtopcounterclockwise(A)andlift(B)
to remove the inhalation top from the medication cup.
4 Add the correct amount of prescribed medication to the medication cup.
WARNING
• For type, dose, and regime of medication follow the instructions
of your physician or licensed healthcare practitioner.
• Do not spill water or other liquids on the compressor and AC
adapter. These parts are not waterproof. If liquid spills on these
parts, immediately unplug the AC adapter and wipe off the liquid
with gauze or other soft absorbent material.
• Do not use tap or mineral water in the nebulizer for inhaling
purposes.
CAUTION
Do not add more than 7mL of medication to the medication cup.
NOTE: Scales on the nebulizer kit are for reference only. The scale on the outside
of the medication cup is with no baffle in place. Please use the scale on your
syringe or vial for accurate measurement of medication.
5 Make sure that the baffle is securely attached to the
inhalation top.
6 Place the inhalation top on the medication cup.
Align the protrusion on the inhalation top with the
indentation on the medication cup as illustrated (A).
Turntheinhalationtopclockwiseuntilsecurelyclosed(B).
PREPARING THE NEBULIZER FOR USE
To Next Page
Loading...
Need help?
General
