14
1 Twist the air tube plug slightly and push it firmly into the air tube connector
on the upper side of the compressor (A).
2 Twist the air tube plug slightly and push it firmly into the air tube connector
onthebottomofthenebulizerkit(B).
NOTE: Keep the nebulizer kit upright when attaching the air tube. Medication
may spill out of the medication cup.
CAUTION
• Make sure the nebulizer kit is correctly assembled, the air filter is properly
installed, and the air tube is correctly connected to the compressor and
the nebulizer kit. Air may leak from the air tube during use if not securely
connected.
• Do not use the device if the air tube is bent.
3 Use the nebulizer kit holder as a temporary holder for the nebulizer kit.
NOTE: Align the mark on the unit with the mark on the nebulizer kit as shown.
ATTACHING THE AIR TUBE
To Next Page
Loading...
Need help?
General
