Set the monitor to the current date and time before taking a measurement
for the first time. If the current date and time are not set correctly, the
measurement values stored in the memory and the average values may
not be correct.
1. TO START THE SETTING
Press the Date/Time Setting
button ( ) to adjust the date
and time.
The year flashes on the display.
2. SETTING THE YEAR
The year can be set between
2006 and 2030.
When the display reaches 2030, it will return
to 2006.
Press the Memory Up button to advance
by increments of one year.
Press the Date/Time Setting button ( ) to set
the current year.
The month flashes on the display.
NOTES: • Press the Memory Down button to decrease the day
and time values by increments of one.
• Press and hold the Memory button to increase or decrease
the date and time values faster.
17
SETTING THE DATE AND TIME
BP755IM_E_SP_q6_R2.qxd 5/26/09 4:14 PM Page 17
To Next Page
Loading...
Need help?
General
