8
EN
• These specifications are subject to change without notice.
• This monitor is clinically investigated according to the requirements of ISO 81060-2:2013. In the clinical validation study, K5 was used on 85
subjects for determination of diastolic blood pressure.
• IP classification is degrees of protection provided by enclosures in accordance with IEC 60529. This monitor and optional AC adapter are protected
against solid foreign objects of 12.5 mm diameter and greater such as a finger. The optional AC adapter is protected against oblique falling water
drops which may cause issues during a normal operation.
About a wireless communication interference
This product operates in an unlicensed ISM band at 2.4 GHz. In the event this Product is used near other wireless devices such as microwave and
wireless LAN, which operate on the same frequency band as this Product, there is a possibility that interference may occur. If interference occurs,
stop the operation of the other devices or relocate this Product away from other wireless devices before attempting to use it.
6. Important Information regarding Electromagnetic Compatibility (EMC)
JPN610T manufactured by OMRON HEALTHCARE Co., Ltd. conforms to IEC 60601-1-2:2014 / EN 60601-1-2:2015 Electromagnetic Compatibility
(EMC) standard.
Further documentation in accordance with this EMC standard is available at:
Taiwan: https://www.omronhealthcare.com.tw/EMC
Refer to the EMC information for JPN610T on the website.
7. Guidance and Manufacturer’s Declaration
• This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., Japan. The Core component for OMRON blood
pressure monitors, which is the Pressure Sensor, is produced in Japan.
To Next Page
Loading...
Need help?
General
