Omron MIT Elite User Manual

11
2.Preparation
EN
Battery Life & Replacement
If the battery low symbol ( ) appears on the display, replace all four
batteries at the same time.
- When the battery low symbol ( ) starts to blink, you will still be
able to use the unit for a short while. You should replace the
batteries with new ones ahead of time.
- When the symbol ( ) remains lit, the batteries are exhausted. You
should replace the batteries with new ones at once. Turn the unit off
before replacing the batteries.
• Remove the batteries if the unit will not be used for three months or
more.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be reset. See “2.2 Setting the Date and
Time” for details.
• Dispose of batteries according to applicable local regulations.
Four new
“AAA” alkaline batteries will last for approximately 300
measurements, when used to take three measurements a day.
Since the supplied batteries are for monitoring use only, they may have
a shorter life and not last for 300 measurements.

Omron MIT Elite Specifications

General

Type	Automatic
Cuff size	22 - 32 cm
Display type	LCD
Memory slots	90
Date imprinting	Yes
Speaking function	-
Placement supported	Upper arm
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)