1
Introduction
OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
Introduction
Thank you for purchasing an OMNUC G5-series Servo Drive. This manual explains how to install
and wire the Servo Drive, set parameters needed to operate the Servo Drive, and remedies to be
taken and inspection methods to be used should problems occur.
Intended Readers
This manual is intended for the following individuals.
Those having electrical knowledge (certified electricians or individuals having equivalent
knowledge) and also being qualified for one of the following:
• Introducing FA equipment
• Designing FA systems
• Managing FA sites
Notice
This manual contains information you need to know to correctly use the Servo Drive and peripheral
equipment. Before using the Servo Drive, read this manual and gain a full understanding of the
information provided herein.
After you finished reading this manual, keep it in a convenient place so that it can be referenced at
any time.
Make sure this manual is delivered to the end user.
To Next Page
Loading...
Need help?
General
