Page 13
Maintenance and storage
Maintenance
To protect your unit from damage, please avoid the following:
Subjecting your unit to extreme temperatures, humidity, moisture or direct sunlight.
Washing the cuff or exposing the cuff or unit to water
Disassembling the unit.
Subjecting the unit to strong shocks or vibrations. Dropping the unit.
Cleaning the unit with volatile liquids.
The unit should be cleaned with a soft, dry cloth.
Use a soft, moistened cloth and soap to clean the arm cuff.
Calibration and Service
The accuracy of this blood pressure monitor has been carefully tested and is designed for a
long service life.
It is generally recommended to have the unit inspected every two years to ensure correct
functioning and accuracy. Please consult your authorized OMRON dealer or the OMRON
Customer Service at the address given on the packaging or attached literature.
Storage
Do not store the unit in the following conditions:
If the unit is wet.
Locations exposed to extreme temperatures, humidity, direct sunlight, dust, chemicals or
corrosive vapours.
Locations exposed to vibrations, shocks or where it will be at an angle.