205Varispeed V7
Frequency Inverters
CIMR-V7AZ
Varispeed V7
Sensorless vector in pocket size
• Nominal torque at 0.5 Hz
• Autotuning
• High carrier up to 14 khz
• Stop accuracy
• Integrated PID controller and bidireccional PID-out put
• Motor protection with PTC input
• Pulse input
• Standard digital operator with copy function
• Fieldbus: Modbus, DeviceNet, PROFIBUS, CANopen
• High speed motion bus: ML- II
• Plug-in PLC option unit. Total inverter access.
• CE, UL, and cUL marked
V7 IP65
• Compact size
• Easy wiring.
• Built-in filter. ( Class B )
Customised Software*
• The inverter sofware can be customised to meet specific
aplications.
•Example:
• Traverse sofware S-9381.
*For a detailed information please refer to case software section.
Ratings
• 200V Class single-phase 0.1 to 4 KW
• 200V Class three-phase 0.1 to 7.5 KW
• 400V Class three-phase 0.2 to 7.5 KW
System Configuration
R
S
T
PLC Option Unit Option frame accessory
Varispeed V7
Communication Unit
Line Filter
3G3MV-PFI@
Input Noise Filter
Power Supply
Single-phase, 200 V AC (200-V class)
Three-phase, 200 V AC (200-V class)
Three-phase, 400 V AC (400-V class)
Braking Accessories
LKEB@ Braking
Resistor Unit
CDBR@B
Braking Unit
ERF150WJ@
Braking Resistor
JVOP-144
Remote Digital Operator
With potentiometer
JVOP146
Remote Digital Operator
Without potentiometer
3G3IV-PCN126/326
Digital Operator
Extension Cable
Special Accessories
3G3IV-PCN329-E
Inverter to PC cable
CX-Drive
DIN attachment
3G3IV-PZZ8122
@
Second analog
input cable
3G3MV-PCN-CN2
* See note
* V7 IP65 types are built-in filter inverters.
* See note
* See note
* Option frame accessory is needed for V7 IP65 types when communication option unit or PLC option unit are used.
To Next Page
Need help?
General