One for All Essence 4 Device User Manual

9
SETUP
VOLUME LOCK
If you primarily use one device for controlling sound, for
example a Sound Bar or Audio Video Receiver, it’s possible
to program your Essence remote to only control that device
when you use the Volume Up, Down and Mute keys. To do
this:
1. Hold down the SETUP key until the LED
under the Device key blinks twice.
2. Press 993 – the LED should blink twice.
3. Press the device key for the device to
always control volume – for example
Audio.
4. The LED will blink twice.
From now on, pressing the Volume Up, Down or Mute keys
will always control the the above programmed device, no
matter what device you are controlling.
To unlock the volume, and return the remote to controlling
each device’s sound individually, the procedure is:
1. Hold down the SETUP key until the LED
under the Device key blinks twice
2. Press 993 – the LED should blink twice
3. Press VOLUME DOWN – the LED will blink
four times and Volume is now unlocked.
Deleting a learned function
If you want to delete a learned function and return that key
to its original state, you can use the following procedure:
1. Press the Device key for the device your learned
function operates
2. Hold down the SETUP key until the LED
under the Device key blinks twice
3. Press 976 – the LED should blink twice
4. Press the key you want to reset twice – the LED
should blink twice and the learned function has been
deleted.
713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 9713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 901-12-2022 16:2001-12-2022 16:20

One for All Essence 4 Device Specifications

General

Brand	One for All
Model	Essence 4 Device
Category	Remote Control
Language	English