46
Listening to the Radio—Continued
With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one
go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you
want to change stations. The Auto Preset function does not preset DAB and AM radio stations (see page 47).
Note:
Depending on your location, a preset may be stored with no
station and you will hear only noise when you select it. In
this case, delete the preset (see page 51).
After Storing Presets You Can:
• Select them (see page 48)
• Name them for easy identification (see page 49)
• Copy them (see page 50)
• Erase them (see page 51)
Presetting FM Stations Automatically (Auto Preset)
1
Press the [BAND] or INPUT
[t]/[1] buttons repeatedly until
“FM” appears.
Make sure the FM antenna is positioned
to achieve the best possible reception.
2
Press the [MENU/NO] button, and
then use the Previous and Next
[7]/[6] buttons to select
“AutoPreset?”.
3
Press [ENTER].
The confirmation message “AutoPre-
set??” appears.
To cancel the Auto Preset function at this
point, press the [MENU/NO] button.
/
MENU/NO
ENTER
INPUT
/
BAND
or
4
To start the Auto Preset function,
press [ENTER].
Up to 20 stations can be preset and pre-
sets are stored in frequency order.
Any existing presets will be deleted when the
Auto Preset function is run.
Auto Preset Caution!
To Next Page
Loading...
Need help?
General
