Basic Operations —Continued
19
Adjusting the Bass, Treble and
Balance
1
Press the [TONE] button to select
“
Bass”.
2
Use the [ ] / [ ] buttons to
adjust the bass.
Press [ENTER], and then use the
[ ] / [ ] buttons to adjust the
treble.
The default setting is “0”. You can adjust
the bass and treble from –4 to +4.
Press [ENTER], and then use the
[ ] / [ ] buttons to adjust the
balance.
The default setting is “0”. You can adjust
the balance from L+5 to 0, then 0 to R+5.
Tip:
To adjust the bass,
treble and balance, you
can also use TONE /
BALANCE button and
knob.
Note:
If you press no buttons
for 8 seconds, the
previous display will appear automatically.
Using the Super Bass Function
To turn off the Super Bass function, press
the [S.BASS] button.
The S.BASS indicator disappears.
To turn on the Super Bass function, press the
[S.BASS] button again.
Note:
The default setting of Super Bass function is on.
To Next Page
Loading...
Need help?
General
