Onkyo DS-A1 User Manual

14
Using the RI Dock
—Continued
Starting Playback on Your iPod
If you start playback on your iPod, your amp’s input
source will automatically switch to the input to which
your iPod is connected. If your amp is on Standby, it
will automatically turn on first.
Using Your iPod’s Alarm Clock
You can use your iPod’s Alarm Clock function to auto-
matically turn on your iPod and amp at a specified
time. Your amp’s input source will automatically be
set to the input to which your iPod is connected.
Notes:
•To use these functions, your iPod must be in the RI
Dock, and the RI Dock must be connected to your
amp with both an cable and an audio cable.
•When you use these functions, be sure to set your
amp’s volume control to a suitable level.
•Your amp may take several seconds to startup, so
you might not hear the first few seconds of the first
song.
•When you select a different input source, stop
playback on your iPod to prevent your amp from
selecting the iPod input source by mistake.
•If any accessories are connected to your iPod, your
amp may not be able to select the input source
properly.
Charging Your iPod Battery
The RI Dock charges your iPod battery while your
iPod is in the RI Dock.
Notes:
•To charge your iPod battery, the AC adapter must
be plugged into a suitable wall outlet, and con-
nected to the RI Dock’s DC IN jack.
•Your iPod battery will be charged even when the RI
Dock’s Power indicator is off.
•See your iPod’s instruction manual for more infor-
mation on battery charging.
iPod Functions
DS-A1En.book Page 14 Friday, April 22, 2005 11:19 AM

Onkyo DS-A1 Specifications

General

Brand	Onkyo
Model	DS-A1
Category	Docking Station
Language	English