12
En
Connecting the Speaker Cables
Screw-type speaker terminals
Push-type speaker terminals
The following illustration shows which speaker should be connected to each pair of terminals.
Strip 12 to 15 mm of insulation from the
ends of the speaker cables, and twist the
bare wires tightly, as shown.
(Supplied speaker cables are already
stripped.)
Strip 10 to 12 mm of insulation from the ends of the speaker
cables, and twist the bare wires tightly, as shown.
(Supplied speaker cables are already stripped.)
12 to 15 mm
10 to 12 mm
Red
White
Gray Blue
Green Purple
Red White
Front
left
speaker A
Surround
right
speaker
Surround
left
speaker
Center speaker
Subwoofer
Front
right
speaker A
Front
left
speaker B
Front
right
speaker B
To Next Page
Loading...
Need help?
General
