16
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
Remote Controller
1. ON/STANDBY button
2. Input selector buttons: Switches the input to be played.
3. Play buttons: Used for playback operations for the Music Server ( p59)
or USB device ( p56). If the unit is switched to "CEC MODE" using
"19. MODE button" , an HDMI CEC function-enabled AV component can be
operated. (Depending on the device, operation may not be possible.)
4.
Q (QUICK MENU) button: Pressing this button during playback can make settings
such as "Tone" and "Level" quickly on the TV screen while playing. ( p124)
5. Cursor buttons and ENTER button: Select an item with the cursors, and press
ENTER to conrm your selection. Pressing / can switch the screen when a
music folder list or le list is not displayed on one screen on the TV.
6. button: Display advanced setting items on the TV or the display to have a
more enjoyable experience with this unit. ( p102)
7. TONE button: Adjusts the sound quality. ( p78)
8. LISTENING MODE button: Select a listening mode ( p80).
9. DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned o completely.
10.
ZONE 2 SHIFT button: Control the multi-zone function ( p74). (The ZONE
3 SHIFT button cannot be used with this unit.)
11.
SLEEP button: Set the sleep timer. Select the time from "30 min", "60 min" and
"90 min". ( p79)
12.
HDMI MAIN/SUB button: Select the HDMI OUT jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".
13.
button: Switches the information on the display and is used to operate RDS
( p73). Also, when the "BLUETOOTH" input selector is selected, pressing
and holding this button for 5 seconds or more will switch to the pairing mode.
14.
button: Returns the display to the previous state while setting.
15.
button: Temporarily mutes audio. Press the button again to cancel muting.
16.
VOLUME buttons
17.
CLEAR button: Deletes all characters you have entered when entering text on
the TV screen.
18.
MEMORY button: Used to register AM/FM radio stations. ( p71)
19.
MODE button: Switches between automatic tuning and manual tuning for
AM/FM stations ( p69). Also, when an HDMI CEC function-enabled AV
component is connected to this unit, you can switch "3. Play buttons" between
"CEC MODE" and "RCV MODE" (normal mode).
To Next Page
Loading...
Need help?
General
