Onkyo TX-NR828 User Manual

E n
AV RECEIVER
TX-NR828
Instruction Manual
Contents
Safety Information and Introduction ............2
Table of Contents...........................................6
Connections .................................................14
Turning On & Basic Operations..................24
Playback........................................................32
Advanced Operations ..................................56
Controlling Other Components...................82
Appendix.......................................................91
Internet Radio Guide
Remote Control Codes

Onkyo TX-NR828 Specifications

General

Impedance	6 Ω
Receiver type	Surround
Frequency range	20 - 20000 Hz
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	8
Digital audio coaxial in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Speakers connectivity type	-
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Ethernet LAN	Yes
AM band range	530 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
Product color	Silver
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	720 W
THX-certified	THX Select2 Plus
Package weight	18500 g

Weight and Dimensions

Depth	398 mm
Width	435 mm
Height	198.5 mm
Weight	15000 g