Do you have a question about the Onkyo TX-NR708 and is the answer not in the manual?
power supply | AC 220–240 V~, 50/60 Hz |
---|---|
power consumption | 570 W |
dynamic power (3 Ω) | 250 W |
dynamic power (4 Ω) | 220 W |
dynamic power (8 Ω) | 130 W |
power output (front L/R) | 170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC) |
---|---|
power output (center) | 170 W (6 Ω, 1 kHz, 1 channel driven, IEC) |
power output (surround L/R) | 170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC) |
thd (total harmonic distortion) | 0.08% (Rated power) |
damping factor | 60 (Front, 1 kHz, 8 Ω) |
input sensitivity and impedance (line) | 200 mV/47 kΩ |
---|---|
input sensitivity and impedance (phono MM) | 2.5 mV/47 kΩ |
frequency response | 5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass) |
tone control (bass) | ±10 dB, 50 Hz |
tone control (treble) | ±10 dB, 20 kHz |
video input sensitivity/output level and impedance (component and S-Video Y) | 1.0 Vp–p/75 Ω |
---|---|
video input sensitivity/output level and impedance (component PB/CB, PR/CR) | 0.7 Vp–p/75 Ω |
video input sensitivity/output level and impedance (S-Video C) | 0.25 Vp–p/75 Ω |
video input sensitivity/output level and impedance (composite) | 1.0 Vp–p/75 Ω |
component video frequency response | 5 Hz–100 MHz/0 dB, -3 dB |
tuning frequency range (fm) | 87.5 MHz–108 MHz |
---|---|
tuning frequency range (am) | 522 kHz–1, 611 kHz |
fm/am preset memory | 40 stations |
weight | 12.5 kg |
---|---|
dimensions | 435 x 175 x 379 mm |
carton dimensions | 570 x 298 x 469 mm |
carton weight | 16.5 kg |