EasyManuals Logo
Home>Onkyo>Receiver>TX-NR708

Onkyo TX-NR708 User Manual

Onkyo TX-NR708
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
En
About Home Theater
Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your
own home—just like being in a movie theater or concert hall. With Blu-ray Discs or DVDs, you can enjoy DTS and
Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP lis-
tening modes.
You can also enjoy THX Surround EX (THX-certified THX speaker system recommended).
Enjoying Home Theater
abFront speakers (Left and Right)
These output the overall sound. Their role in a home theater is to pro-
vide a solid anchor for the sound image. They should be positioned
facing the listener at about ear level, and equidistant from the TV.
Angle them inward so as to create a triangle, with the listener at the
apex.
c Center speaker
This speaker enhances the front speakers, making sound movements
distinct and providing a full sound image. In movies it’s used mainly
for dialog. Position it close to your TV facing forward at about ear
level, or at the same height as the front speakers.
deSurround speakers (Left and Right)
These speakers are used for precise sound positioning and to add real-
istic ambience. Position them at the sides of the listener, or slightly
behind, about 2 to 3 feet (60 to 100 cm) above ear level. Ideally they
should be equidistant from the listener.
f Subwoofer(s)
The subwoofer handles the bass sounds of the LFE (Low-Frequency
Effects) channel. The volume and quality of the bass output from your
subwoofer will depend on its position, the shape of your listening
room, and your listening position. In general, a good bass sound can be
obtained by installing the subwoofer in a front corner, or at one-third
the width of the wall, as shown.
ghSurround back speakers (Left and Right)
These speakers are necessary to enjoy Dolby Digital EX, DTS-ES
Matrix, DTS-ES Discrete, THX Surround EX, etc. They enhance the
realism of surround sound and improve sound localization behind the
listener. Position them behind the listener about 2 to 3 feet (60 to
100 cm) above ear level.
ijFront high speakers (Left and Right)
These speakers are necessary to enjoy Dolby Pro Logic IIz Height, and
Audyssey DSX™. They significantly enhance the spatial experience.
Position them at least 3.3 feet (100 cm) above the front speakers (pref-
erably as high as possible) and at an angle slightly wider than the front
speakers.
klFront wide speakers (Left and Right)
These speakers are necessary to enjoy Audyssey DSX. They signifi-
cantly enhance the spatial experience. Position them well outside of the
front speakers. See also
http://www.audyssey.com/technology/dsx.html
about optimum speaker placement for Audyssey DSX.
ij
gh
kl
cb
a
f
de
Corner
position
1/3 of wall
position
Tip
To find the best position for your subwoofer, while
playing a movie or some music with good bass,
experiment by placing your subwoofer at various
positions within the room, and choose the one that
provides the most satisfying results.

Table of Contents

Other manuals for Onkyo TX-NR708

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-NR708 and is the answer not in the manual?

Onkyo TX-NR708 Specifications

Power IconPower
power supplyAC 220–240 V~, 50/60 Hz
power consumption570 W
dynamic power (3 Ω)250 W
dynamic power (4 Ω)220 W
dynamic power (8 Ω)130 W
Amplifier Specifications IconAmplifier Specifications
power output (front L/R)170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
power output (center)170 W (6 Ω, 1 kHz, 1 channel driven, IEC)
power output (surround L/R)170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
thd (total harmonic distortion)0.08% (Rated power)
damping factor60 (Front, 1 kHz, 8 Ω)
Audio Specifications IconAudio Specifications
input sensitivity and impedance (line)200 mV/47 kΩ
input sensitivity and impedance (phono MM)2.5 mV/47 kΩ
frequency response5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass)
tone control (bass)±10 dB, 50 Hz
tone control (treble)±10 dB, 20 kHz
Video Specifications IconVideo Specifications
video input sensitivity/output level and impedance (component and S-Video Y)1.0 Vp–p/75 Ω
video input sensitivity/output level and impedance (component PB/CB, PR/CR)0.7 Vp–p/75 Ω
video input sensitivity/output level and impedance (S-Video C)0.25 Vp–p/75 Ω
video input sensitivity/output level and impedance (composite)1.0 Vp–p/75 Ω
component video frequency response5 Hz–100 MHz/0 dB, -3 dB
Tuner Specifications IconTuner Specifications
tuning frequency range (fm)87.5 MHz–108 MHz
tuning frequency range (am)522 kHz–1, 611 kHz
fm/am preset memory40 stations
Weight and Dimensions IconWeight and Dimensions
weight12.5 kg
dimensions435 x 175 x 379 mm
carton dimensions570 x 298 x 469 mm
carton weight16.5 kg

Related product manuals