EasyManuals Logo
Home>Onkyo>Receiver>TX-NR708

Onkyo TX-NR708 User Manual

Onkyo TX-NR708
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
89
En
Specifications
Amplifier Section
Video Section
Tuner Section
General
HDMI
Video Inputs
Video Outputs
Audio Inputs
Rated Output Power
All channels:
(North American)
110 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of
0.08% (FTC)
120 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7% (FTC)
130 watts minimum continuous power
per channel, 6 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
(Others)
7 ch × 170 W at 6 ohms, 1 kHz, 1 ch driven
(IEC)
Maximum Effective Output Power
(Asian)
7 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven
(JEITA)
Dynamic Power 250 W (3 , Front)
220 W (4 , Front)
130 W (8 , Front)
THD (Total Harmonic Distortion)
0.08% (Power Rated)
Damping Factor 60 (Front, 1 kHz, 8 )
Input Sensitivity and Impedance
200 mV/47 k (LINE)
2.5 mV/47 k (PHONO MM)
Rated RCA Output Level and Impedance
200 mV/470 (PRE OUT)
Maximum RCA Output Level and Impedance
4.6 V/470 (PRE OUT)
Phono Overload 70 mV (MM 1 kHz 0.5%)
Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio 106 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)
Speaker Impedance 4 or 6 - 16
Input Sensitivity/Output Level and Impedance
1 Vp-p/75 (Component and S-Video Y)
0.7 Vp-p/75 (Component PB/CB, PR/CR)
0.25 Vp-p/75 (S-Video C)
1 Vp-p/75 (Composite)
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, -3 dB
FM Tuning Frequency Range
(North American and Taiwan)
87.5 MHz - 107.9 MHz
(Others) 87.5 MHz - 108.0 MHz, RDS
AM Tuning Frequency Range
(North American and Taiwan)
530 kHz - 1710 kHz
(Others) 522/530 kHz - 1611/1710 kHz
Preset Channel 40
Digital Tuner (North American)
SIRIUS
Power Supply (North American and Taiwan)
AC 120 V, 60 Hz
(Others) AC 220 - 240 V, 50/60 Hz
Power Consumption (North American) 6.3 A
(Others) 570 W
Stand-by Power Consumption
(North American) 0.2 W
(Others) 0.3 W
Dimensions
(W × H × D)
435 mm × 175 mm × 379 mm
17-1/8" × 6-7/8" × 14-15/16"
Weight 12.5 kg (27.6 lbs.)
Input IN 1, IN 2, IN 3, IN 4, IN 5, IN 6,
AUX INPUT
Output OUT
Video Resolution 1080p
Audio Format Dolby TrueHD, DTS Master Audio,
DVD-Audio, DSD
Supported 3D, Audio Return Channel, Deep Color,
x.v.Color, LipSync, CEC
Component IN 1, IN 2
S-Video BD/DVD, VCR/DVR, CBL/SAT, GAME
Composite BD/DVD, VCR/DVR, CBL/SAT, GAME,
AUX
Analog RGB input PC IN
Component MONITOR OUT
S-Video MONITOR OUT, VCR/DVR OUT
Composite MONITOR OUT, VCR/DVR OUT
Digital Optical: 2
Coaxial: 3
Analog BD/DVD, VCR/DVR, CBL/SAT, GAME,
PC, TV/CD, AUX, PHONO
Multichannel Inputs 7.1

Table of Contents

Other manuals for Onkyo TX-NR708

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-NR708 and is the answer not in the manual?

Onkyo TX-NR708 Specifications

Power IconPower
power supplyAC 220–240 V~, 50/60 Hz
power consumption570 W
dynamic power (3 Ω)250 W
dynamic power (4 Ω)220 W
dynamic power (8 Ω)130 W
Amplifier Specifications IconAmplifier Specifications
power output (front L/R)170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
power output (center)170 W (6 Ω, 1 kHz, 1 channel driven, IEC)
power output (surround L/R)170 W/Ch (6 Ω, 1 kHz, 1 channel driven, IEC)
thd (total harmonic distortion)0.08% (Rated power)
damping factor60 (Front, 1 kHz, 8 Ω)
Audio Specifications IconAudio Specifications
input sensitivity and impedance (line)200 mV/47 kΩ
input sensitivity and impedance (phono MM)2.5 mV/47 kΩ
frequency response5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass)
tone control (bass)±10 dB, 50 Hz
tone control (treble)±10 dB, 20 kHz
Video Specifications IconVideo Specifications
video input sensitivity/output level and impedance (component and S-Video Y)1.0 Vp–p/75 Ω
video input sensitivity/output level and impedance (component PB/CB, PR/CR)0.7 Vp–p/75 Ω
video input sensitivity/output level and impedance (S-Video C)0.25 Vp–p/75 Ω
video input sensitivity/output level and impedance (composite)1.0 Vp–p/75 Ω
component video frequency response5 Hz–100 MHz/0 dB, -3 dB
Tuner Specifications IconTuner Specifications
tuning frequency range (fm)87.5 MHz–108 MHz
tuning frequency range (am)522 kHz–1, 611 kHz
fm/am preset memory40 stations
Weight and Dimensions IconWeight and Dimensions
weight12.5 kg
dimensions435 x 175 x 379 mm
carton dimensions570 x 298 x 469 mm
carton weight16.5 kg

Related product manuals