78
En
Controlling Other Components
You can use the AV receiver’s remote controller
(RC-768M) to control your other AV components, includ-
ing those made by other manufacturers. This section
explains how to enter the remote control code (with the
default underlined) for a component that you want to con-
trol: DVD, TV, CD, etc.
• Learn commands directly from another component’s
remote controller (➔ 82).
• Program ACTIVITIES to perform a sequence of up to 32
remote control actions (➔ 82).
The following REMOTE MODE are preprogrammed
with remote control codes for controlling the components
listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the pages
indicated.
You can look up for appropriate remote control code from
on-screen setup menu.
Preprogrammed Remote Control
Codes
BD/DVD Onkyo Blu-ray Disc player (➔ 80)
TV/CD Onkyo CD player (➔ 80)
PORT Onkyo Universal Port Option (➔ 76)
Looking up for Remote Control Code
This setting can not be carried out by using the AV
receiver’s display.
1
Press RECEIVER followed by SETUP.
The main menu appears onscreen.
Tip
• If the main menu doesn’t appear, make sure the appropri-
ate external input is selected on your TV.
2
Use q/w to select “Remote Controller Setup”, and
then press ENTER.
The “Remote Controller Setup” menu appears.
3
Press ENTER.
The “Remote Mode Setup” menu appears.
Remote Mode Setup
8. Remote Controller Setup
TV
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TV/CD
PHONO
8–1. Remote Mode Setup
4
Use q/w to select remote mode, and then press
ENTER.
The category selection menu appears.
5
Use q/w to select category, and then press
ENTER.
The brand name input panel appears.
6
Use q/w/e/r to select a character, and then press
ENTER.
Repeat this step from the 1st character to the 3rd
character of the brand name.
When you have entered the 3rd character, press
ENTER.
After searching, a list of the brand name appears.
Tip
• If the brand name is not found, use r to select “Not
Listed”, and then press ENTER.
The brand name input panel appears.
7
Use q/w to select brand, and then press ENTER.
After searching, a remote control code and the input
procedure appear. Try it.
TV
TV/DVD
TV/VCR
8–1. Remote Mode Setup
TV
ABCDEFGH I J KLM
NOPQRS TUVWXYZ
1234567890 &@
–
Space
Back Space
Search
8–1. Remote Mode Setup
TV
Category
Brand
TV
8–1. Remote Mode Setup
TV
TVCategory
Brand
Not Listed
Sonawa
Sonber
Songba
Sonic
Soniko
8–1. Remote Mode Setup
TV
Code 11339
1. While holding down Remote Mode [TV],
press and hold down [DISPLAY] (3 seconds).
2. Enter the 5-Digit remote control code.
3. Push some key to see if the TV responds.
4. Push Remote Mode [RECEIVER].
5. Choose “Works” or “Doesn’t work”.
Works
Doesn’t work (Try next code)
Remote control code
(Number of search results)
To Next Page
Loading...
Need help?
Power
Amplifier Specifications
Weight and Dimensions
