Onkyo UWF-1 Getting Connected

Getting Connected
UWF-1
Wireless USB LAN Adapter
Manual Setup
Auto Setup
Wireless Setup
Manual Setup (View Network)
Auto Setup (Select from Router)
Wireless Setup
Manual Setup
sample network name
sample network 2
sample network 3
Manual Setup
Choose “Manual Setup (View Network)”
Choose your network
Display Screen Diagrams
Choose Manual Setup if your system requires a Security Code
to connect, or choose Auto Setup if your router has Automatic
Security Setup (WPS).
ENTER
Manual or Auto Setup?
Use your receiver’s remote control or front panel controls
to navigate the display menu choices.
Refer to the display screen diagrams at left and
below for help implementing your UWF-1’s wireless
capacity. Further details are in your UWF-1’s manual.
Connect the UWF-1 to the USB port on your network-capable
Onkyo receiver; Press USB on the receiver’s faceplate to
select USB input.

Onkyo UWF-1 Specifications

General

Interface	WLAN
Connectivity technology	Wired
Chipset	-
Internal	No
Product color	Black
Wi-Fi	Yes
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	- Mbit/s
Power consumption	310 mA
Package depth	17.5 mm
Package width	96 mm
Package height	201 mm
Package weight	100 g

Weight and Dimensions

Depth	17 mm
Width	29.8 mm
Height	8.4 mm
Weight	3.4 g