Appendix
OPTIMUM
MASCHINEN - GERMANY
29 / 11 / 2006
Page
20
Appendix CNC Controller III and VI ; Version 2.0.1
© 2006
GB
11.4 Disposal
Disposal of used electric and electronic machines
(Appliance in the countries of the European Union and other European countries with a separate
collecting system for those devices).
The sign of the product or on its packing indicates that the product must not be handled as
common household waste, but that it needs to be delivered to a central collection point for
recycling. Your contribution to the correct disposal of this product will protect the environment
and the health of your fellow men. The environment and the health are endangered by incorrect
disposal. Recycling of material will help to reduce the consumption of raw materials. Your
District Office, the municipal waste station or the shop where you have bought the product will
inform you about recycling of this product.
11.5 Product follow-up
We are required to perform a follow-up service for our products which extends beyond shipment.
We would be grateful if you could send of the following information:
modified settings.
experiences with the CNC Controller, which could be important to other users.
recurring failures.
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Phone +49 (0) 951 - 96 822 - 0
Fax +49 (0) 951 - 96 555 - 22
E-Mail: info@optimum-maschinen.de
To Next Page
Loading...
Need help?
General
