Power On the Server (Oracle ILOM CLI)
Power On the Server (Oracle ILOM CLI)
Note - By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43.
1.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM” on page 17.
Note - If you have a modular system, ensure that you are logged in to the desired server
module.
2.
At the Oracle ILOM prompt, type:
-> start /System
Are you sure you want to start /System (y/n) ? y
Starting /System
Note - To skip being prompted for confirmation, use the start -script /System command.
3.
Switch to the host console to view host output.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Related Information
■
“Power On the Server (Oracle ILOM CLI)” on page 24
■
“Reset the Server (Oracle Solaris)” on page 30
■
“Reset the Server (Oracle ILOM)” on page 30
Power Off the Server (Oracle ILOM CLI)
1.
Log in to Oracle Solaris as a user with root privileges.
2.
Shut down Oracle Solaris.
24 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016
To Next Page
Need help?
General
