4. Run Time
• Turn the dial to [RUN TIME].
• Press the PROGRAM button to select which
program you’d like to set.
STATION is the area that will be watered by each valve.
On this screen the RUN TIME or duration for each
station is set.
• Press the [ ] to select a station and press the
[+/–] buttons to enter the watering duration for
that station.
• Press [ENTER] or the [ ] buttons to move to
the next station/valve, and enter watering duration
for each station.
5. How Often
• Turn the dial to [HOW OFTEN] - this screen allows
you to set how often to water.
There are 3 options provided:
1. Days of the week (Mon, Tues, Wed, etc.)
2. Intervals (Every “X” number of days)
3. Odd or Even Days
The display will show
Please note that [START TIME] is the time of day that
your programmed watering starts. You can set up to
4 start times at each program if you want to water
more than once per day. All stations that have a
programmed run time (how long) will run in sequence
at each start time.
Note: Start-Time Stacking
When a start time is set before the previous program has
completed, that start time will be “stacked” or delayed,
and will start upon completion of the previous program.
Example: Bill just planted new grass seed and wants
to water three times per day. He sets START TIME 1
for 5am, START TIME 2 for 12pm, and START TIME 3
for 5 pm.
He sets the INT (interval) to water every 1 DAYS (see
section 3, HOW OFTEN).
In AUTO mode the system will water 3 times per day.
Once Bill’s sod is established he can CLEAR start
times 2 and 3 and return to watering just once per day.
10
To Next Page
Loading...
Need help?
General
