ASSEMBLY INSTRUCTION
PREPARATION: Before assembling, make sure that you will have enough space
around the item. Use the present tooling for assembling. Before assembling,
please check whether all needed parts are available.
It is strongly recommended that this machine to be assembled by two or more
people to avoid possible injury.
STEP 1
Attach front stabilizer (2) and rear stabilizer (4) to main frame (1) by carriage bolt (6),
arc washers(8) and acorn nut (9)
STEP 2
Tighten the right pedal (11R) which marked “R” onto the right side of the crank (10R) , then
circumvolved easily and tighten. Do the same way to tighten the left pedal (11L) which marked
“L” onto the left side of the crank (10L), then circumvolve anticlockwise and tighten.
To Next Page
Loading...
Need help?
General
