Do you have a question about the Oreck XL3610HH and is the answer not in the manual?
| Type | Upright |
|---|---|
| Weight | 8 lbs |
| Filtration | HEPA |
| Cleaning Path Width | 12 inches |
| Power Source | Corded Electric |
| Cord Length | 30 ft |
Lists the various Oreck XL upright vacuum cleaner models covered by this service parts list.
Identifies specific models within the Silver Series for parts reference.
Details key specifications, product information, and data label explanations.
Provides essential notes on component configuration, repair procedures, and spare part standardization.
Lists specialized tools required for vacuum cleaner maintenance and repair.
Comprehensive list of standard fasteners, their part numbers, and usage in vacuum models.
Catalog of available standard parts kits for Oreck vacuum cleaners.
Illustrates the components located on the right side of the vacuum cleaner.
Illustrates the components located on the left side of the vacuum cleaner.
Visual representation of parts specific to the Oreck Silver Series vacuum cleaners.
Diagrams showing exploded views of key vacuum cleaner assemblies.
Detailed part numbers for XL3600, XL3610, U3700, and U3710 upright vacuum models.
Detailed part numbers for Silver Series U3770 and U3771 upright vacuum models.
Detailed part numbers for U3760, U3720HG, and U3720HR upright vacuum models.
Part numbers for XL3640, U3640, XL3800, XL3900, XL3910, U3980, U3990 series vacuums.
Wiring diagrams for various residential Oreck upright models on page 15.
Wiring diagrams for residential models with Amtek/Johnson motors on page 16.
Wiring diagrams for commercial Oreck upright models on page 16.
Addresses issues with dust blowing from the bottom of the unit.
Diagnoses and resolves problems related to the unit not picking up effectively.
Covers issues with the brush roll not spinning or belt breakage.
Addresses sparking from plug to handle and unit power failures.
Resolves problems with parts falling off the baseplate.
Addresses noisy operation and issues with the unit not standing up.
Loading...